throw pillow with embroidery wrapped piping

Tweet

The inspiration for this project came from this simple, but gorgeous pillow at Anthropologie.

I thought about doing a metallic thread, but after seeing this pillow tutorial, I thought it would be fun to use a bright color instead.  It definitely would be out of the ordinary for me and it's good to step outside of the box sometimes.

I made this pillow with an envelope closure; you can see my tutorial for that here.  I was going to buy white piping, but my daughter was with me and she picked out lime green.  Also, they were out of white, so we went ahead and used the lime green.  The embroidery floss I used is DMC color 891, found at my local craft store.

Make the pillow following the instructions on the tutorial.  To wrap the piping, knot the end of the embroidery floss and and start from the inside.  Bring your needle out at the base of the piping and stitch around the piping, wrapping the floss around it to cover it.  You can use a satin stitch to make it smooth and perfect, but I like the way it looks with some of the floss overlapping itself a few times and then other spots being a little more smooth.  When you run out of floss, bring the needle back inside and knot it.  Keeping all of your knots inside the pillow will keep the outside looking neat and clean.  To finish this, I needed about 4 1/2 skeins.  While this is a really simple project, it is time consuming.  It took a few weeks to get it done, not because it took that long, but because I don't have large chunks of free time.  It's a great activity to do while watching a show, which is exactly what I did any time my husband and I watched something.

It's a fun way to get the exact color piping you want with a fun texture.  If you tackle this project, I would love to see them.  Link it up in the comments!

Welcome Fall

Tweet

Today is the first day of Fall!  I'm so excited and in honor of this wonderful season, I thought I would put together a list of my favorite DIY fall decor projects.  Today I hung our Fall wreath, you may remember it from last year. *click images for links*

IKEA hack: framed Instagram prints

Tweet

Earlier this year, Persnickety Prints was having a crazy good sale on their Instagram prints, so I went ahead and ordered the majority of my Instagram library at the time.  Actually not really, it was only 160 pictures, but I got them all for $40; what a steal!  It took me awhile to come up with how I wanted to display them, but I knew I wanted something clean, simple and easy.

DIY - Pom-trimmed Duvet Cover

Tweet

For months, maybe even longer, I've been searching for a duvet cover for my daughter's bed that isn't too frilly or to babyish, one that she could grow up with, at least through elementary school maybe, and that proved to be impossible.  I didn't want to spend an arm and a leg on one and all the ones that I liked were way out of my price range.  So I decided that the only reasonable alternative was to make one.  But first, I had to figure out how I wanted it to look, which took way too long.  I finally decided that I wanted it to be solid white, but to have a little something extra so it wasn't just plain, because obviously I could just buy a solid white duvet for like $20.  Then it occurred to me: pompom trim!  Why is it that pretty much anything miniature is by default adorable?  Pompom trim is probably my most favorite thing in the sewing world ever, it's so darn cute!  At first I thought about doing yellow, but then I was worried that doing so would narrow down any decor I could do in her room, so I changed my mind on that and decided to do black instead.  And seriously, white and black is such a great and classic combo, how could you go wrong?  Well, you can't because it turned out freakin' awesome.

To make this duvet cover, I used two of these $4 flat sheets from Ikea and 6.75 yards of pompom trim; I bought mine at Joann's with a 55% off coupon, so it was really cheap.  Just an FYI, the sheets aren't terribly soft, but after washing them they did soften up quite a bit and that was without fabric softener.  I'm sure if you use some, they'll be even softer.  I figured for a duvet cover, this wasn't a problem at all because they're still soft, they're not itchy, and my daughter will have a sheet between her and the duvet anyway.  Now the sheet measures 98" L x 66" W and I had this Ikea comforter already, which measures 86" L x 64" W, so I decided to leave the width of the sheets as they came and to cut the length down 10 inches, so to 88", giving me one inch on all sides to work with.

To start, I laid one of the sheets down, face-side up, and pinned the pom trim to the edge with the balls facing inward, that way when it was turned right-side out, they would be on the outside too (sorry, no pictures of this part!).  I sewed the pom trim down first so that it would be easier to sew the second sheet on top.

Before attaching the second sheet, I cut 4 strips of fabric from remnant parts of the sheets that measured 18 inches long each.  I just cut right along the original hem so that they were all thick and already sewn together; again no pictures, I apologize.  I then folded them in half and attached them to the corners of the duvet on the sides, top and bottom, about 2 inches in.

I sewed over them twice and then they got a third stitch when I sewed on the second sheet, so they're nice and secure and ready to hold the comforter in place.

After the pom trim was attached, I laid the second sheet on top, face down, and sewed along the sides and the top.  At the bottom, where you put the comforter inside, I stitched across six inches from both ends. 

For the last step, I attached 4 pieces of Velcro, each 3 inches long, that were evenly spaced along the bottom.  Make sure that you fold the pom trim under so that it's lined up with the sides.

Now you're done!  Put your comforter inside to make sure it fits right and you're ready to use your brand new, totally custom and very inexpensive duvet cover.

And yes, I photographed it on our bed because currently, our daughter sleeps on a mattress on the floor.  Oh the trouble with living with your in-laws.  But whatever, it's good for her; builds character.

So, do any of you struggle like I do with finding duvet covers or am I just insanely picky?

DIY Tufted Headboard - It's Finished!

Tweet

My husband has been so incredibly supportive and nice enough to help me with this project and together we cranked out our headboard over the weekend.  It's finally done!  And now I kind of feel like...what am I supposed to do now?  Except not really because I have a list of projects, but it really feels weird (in a great way!) to have this done.  I've been wanting to make one for years now and then we finally started it and now it's done.  Crazy!

In my last post, we left off with the legs just being finished and needing to be attached.  To start, I found some screws that were long enough to go all the way through the legs and about 3/4 of the way through the plywood.  Then I found a drill bit that was small enough to create the right size whole for the screws.  The way my father-in-law taught me to do this is to hold up the screw and the drill bit behind it.  If the center of the screw, not the grooves, just barely hides the drill bit, then the drill bit is the right size.  When I calculated the measurements for my legs, I made it so the legs would go up ten inches on the plywood.  I measured ten inches and marked it with a sharpie on both sides, then I triple checked to make sure they were in the same spot.  I then marked a line at 2 and 8 inches from the top of the legs so I knew where to drill my holes.  After the holes were drilled, I clamped the legs down in place and then used the drill to place the screws.  I used four on each leg.

On this leg, the top of the screw broke off, leaving the rest of it still inside the leg, but the leg was secured tightly, so I didn't bother trying to fix it.

After the legs were attached, it was time to add the foam.  Upholstery foam is really pricey, so I decided to use a mattress foam topper instead.  I found these on sale and I decided to get three of them because I wanted the headboard to be really thick and soft.  The foam measured 75" x 54" and our headboard is 80" x 42", so there was plenty of foam, but it needed to be cut to fit.  I did that by laying it down on top of the plywood and lining up the bottom and left side.  Then I cut off the extra at the top and laid it down on the other side to fill in that gap and cut off the extra at the bottom.  To attach the foam, I used this spray adhesive to help it stay in place better, which didn't actually work all that well, but I think I could have used a lot more than I did.  I was just concerned about running out, silly me!

I used the spray adhesive for each layer.  I also switched sides with the smaller piece to avoid the chance of it creating this weird gap after it was all put together.  So I started with the small piece on the right, then on the second layer it was on the left, and then back on the right for the top layer.

After the foam was on, I covered it with quilt batting that measured 90" x 108".  It comes folded in half the short way (so 45" x 108", with two layers), and I decided to just lay it on top of the foam with it folded in half.  The extra layer of batting would just add extra softness.  Pull the batting around and staple it in place.

Make sure it's secured down well without ripping it.  The batting will help to hold the foam in place while your headboard is upright.

After the batting is secured, it's time to start tufting.  I bought 4 yards for this project, but the lady gave me 4 1/2 because it had been cut weird previously.  It was nice to have that extra fabric because we were able to cover the back of the headboard as well.  We started by draping the fabric over the headboard and we made sure that it was straight and in the right place so that we had enough on the top and bottom to staple it down.  The fabric is only 54" wide and the headboard is 42" plus the 15/32" inch thick plywood, 4 1/2" thick foam, and the layer of batting, so we had to be sure we had enough to pull over and back on the top and bottom.

When you start tufting, start on the top row and in the middle.  It'll be much easier to make sure the fabric is gathering in the right places this way.

For the tufting we used a 12" upholstery needle and waxed cording.  The waxed cording was really great because it didn't slip and slide around, which made pulling the buttons tight really easy.  We cut the waxed cording to 12" long and used two strands for each button.  To tuft, we first pushed the needle through the back out to the front so that we could see where the button was going to be.  After making sure it was in the right spot, we pulled the needle all the way through, which left a hole in the fabric so that we could see where to put the needle through again.  Then, we tied the wax cording tight around the back of the button, threaded the needle and pushed it through the hole and out the back.

Once the needle was out the back, my husband would pull the cording all the way out and then I would push the button as deep into the foam as I wanted it to go.  While I held the button in place, my husband then stapled it down, in a zigzag to hold it extra tight, and then he hammered down the nails so everything was secured.

We worked our way out left and right and finished the top row.

At first, things were moving really slowly as we figured out the whole process and started to get the hang of it, but after about the second row, we started to move a lot faster.

While you're tufting, you'll want to make sure to help guide the fabric into a diamond fold, but the fabric will do most of that on it's own.

After you're done with the tufting, it's time to pull the fabric around and staple it in the back.  Make sure that as you do that, you pay attention to where the fabric falls on the button lines because it needs to be gathered and folded so that it looks clean and not bunchy along the edges.  Since we had attached wooden pieces on the back to straighten out the plywood, we decided to use the extra foam we had to cover it up so it won't scratch walls.  We just covered them with the foam and stapled them in place.  Then we used the leftover fabric we had and covered the back with it, stapling it in place.

And now our headboard is complete!

Because it's so tall, it leans a little bit, so we'll need to attach it the wall.  We can't right now because we live with my in-laws and our bed is up against the Murphy bed they installed in our room.  So for now, it leans a little bit, but it still looks great.  I'm so happy with how it turned out!  So what do you guys think?  Is this a project you think you'd like to tackle too?

And in case you're interested, our duvet and shams are West Elm that we got for 50% off in store, the gold diamond pillows are from fabric I designed and I made them using my tutorial, and the navy blue pillow I got at Target on clearance for way cheap, but for some reason online it's full price.

DIY Upholstered Headboard - The Wood Elements

Tweet

This process of making our own headboard has a lot of steps, so I thought that I would break it up into posts based on the different parts rather than trying to cram it all into one really long post.  You can read about the planning stage, see my inspiration photos and get all my measurements for the tufting here, and you can learn how to make your own fabric buttons here.

Since we didn't want our headboard to have to be mounted on the wall, we couldn't use pegboard for the back because it's too flimsy.  We opted for plywood instead and really, the measuring and drilling of the holes for the tufting wasn't that bad at all.

We bought the plywood at Home Depot (this one) and had them cut it down for us to 80"x42".  I've read on other blogs that normally home improvement stores will charge you a couple dollars to cut the wood, but we weren't charged and it was so nice to have the wood cut their for us with their big saw rather than trying to do it at home.  It just seems like it would have been a lot harder than necessary.

The kids sure loved going for a ride too!

To start out, I marked on the headboard where all the rows of holes will be, going across the top and left sides, following my measurements here.  Then I used my measuring tape to find where all the holes needed to be drilled and marked them with a sharpie.  After I had marked the holes, I used a leveler to go over each one and make sure they were all straight and even and lined up exactly where they needed to be.  This part took some time.  I ended up having to go over them twice to be sure that I had them in the right spot.

If you look closely, you can see some silver dots over black dots.  I originally marked where the holes would be with a black sharpie, and then when I double checked them with the leveler, I marked over the black dots with a metallic silver sharpie so that I knew exactly where I needed to drill.  To drill the holes, I used a 3/8" bit so the holes would be plenty big enough for my upholstery needle.

The next thing I did was sand down the plywood.  I didn't want to worry about getting any splinters while working with it, so I sanded it down just enough so that it was smooth; not nice-wood-finish smooth, but smooth enough.  After it was sanded, I dusted it off and coated it with two coats of polyurethane on both sides and all the edges.  Utah has a really dry climate, but if we ever move somewhere that's humid, I want to be sure that the wood won't warp.  So I made sure to coat it well and to get the poly down inside the holes also.  I used this type of polyurethane in satin finish and I used just under a quart for this entire project.

The plywood was bowed pretty badly, so my husband suggested we attach long pieces of wood to the side where it curved down so that they would pull the plywood up and straighten it out.

We centered the four pieces of wood between the rows of holes.  This will be the backside of the headboard so that they don't interfere with the look of the foam padding or the whole tufting process.  To attach the wood pieces to the plywood, my husband drilled screws all the way through.  Some of them went through and stuck out on the other side.  We were going to sand them down, but we couldn't find my father-in-law's metal sander, so my husband took a hammer and broke the ends off.  I went back and gave them a single coat of polyurethane for good measure.

To make the legs, we started out with a board of oak and cut it into two pieces that measured 32.5" long.  Then my husband sent them through the planer to make sure they were even and to cut them down to 3/4" thick.  After that was done, he then cut each board into 3" wide strips so that we had four wood beams that measured 32.5"x3"x3/4".  Then we glued them together so that we had two legs that were 1.5" thick.

We used this wood glue on both sides being glued together so it would hold well.  We spread the glue around with our fingers making sure to cover all the way to the ends.  Then we put the pieces together and clamped them down to hold it in place.

Then my husband used another clamp to hold it on the edges so that the pieces were lined up straight.

And then he did it again on the long ends.

We left the clamps on for about an hour while the glue dried enough so that they would hold well.  The glue seeped out onto the sides, so he took a scraper and scraped all of that off.  After allowing the glue to dry overnight, I sanded down the legs, making sure to get along the edges too because they were pretty sharp and I wanted the legs to have a nice, smooth finish all around.

I used 80 grit sand paper first to smooth it down and then 150 grit to finish it off.  I didn't go any finer than that because this wood isn't going to be used for flooring or anything that will get a lot of body contact.  After they were sanded down, I cleaned them off and stained them with Minwax Early American.  I wanted the legs of our headboard to match the legs on our Ikea hack nightstands.  Just like with the nightstands, I only applied one coat because it was dark enough; any more than that and it would have been too dark.

After the stain dried, I applied two coats of the same polyurethane I used on the plywood.  And that's where we're at now.  We still need to attach the legs to the plywood and then get going on the upholstering and tufting.  Hopefully we'll have it completed in the next week or so!

Abstract Art

Tweet

I'm not an artist and I won't even pretend to be one.  I took art classes all throughout grade school and I couldn't ever get my drawings to look right.  I can't paint beautiful landscape settings or gorgeous portraits.  What I can do is blend colors together and let my emotions guide the brush.

Abstract art is something that I've been drawn to for as long as I can remember.  I'm a very visual person, but I also look for art that evokes some feeling of emotion, which I think most people do.  That's why when I painted this canvas, rather than focusing on making it really pretty and perfect, I let my emotions take control and it resulted in a piece of art that I love and am proud of, because it represents me and how I was feeling when I painted it.  I was able to transfer those emotions from myself to the canvas and, to be honest, they weren't the best feelings, so when I was done, I actually felt a lot better.  Maybe I need more painting in my life?

I found this canvas with an old painting on it at our local antique shop.  It measures 38x22 and I loved it for it's size.  The painting on it had a lot of damage to it and it was actually painted on some paper that was attached to the canvas and there was no signature or name of any kind, so we couldn't even contact the artist because none of us knew who it was made by.  It was ripping off all the way around and it was just in really terrible shape.  I bought it for $7, which I think I could have bought it for even less, but the guy was asking $10 and I'm terrible at haggling, so I still consider this a great deal.

See that damage?  I didn't get a picture of the painting, but it was even worse.  The canvas itself, however, even with the stains, was still in good enough condition to be painted over.

The canvas was pulling away from the wood frame, so I went all the around with a hot glue gun to secure it down.  Then I wiped down the canvas front and back and the frame with a damp cloth to remove any dust or other loose particles.  After it was clean and dry, I painted the entire thing white, including around the edges so that it would have a crisp look.  I used Delta Creative Ceramcoat in white to cover the canvas as well as in my actual painting.  The other colors I used were Metallic 14K Gold by Delta Creative, and Zinc, Navy Blue, and Warm White by Americana.

Here's the finished product.  I love that it's totally unique and custom made, but like I said, what I love most about it is that it reflects me and that I actually painted something I like! 

Working on the Headboard and a New Desk

Tweet

This headboard is going to take forever!  It already is and I'm so sad because I was hoping to have it done awhile ago.  Anyway, we're going to try and get the legs stained, sealed and attached to the backboard tomorrow.  Fingers crossed we can finish that part!

I spent yesterday sealing the backboard so that it won't warp over time.  It was so warm and sunny outside and the kids got to play out back.  They ended the day filthy and exhausted, which is the best.

We also went to a pre-open house of the new Museum of Natural Curiosity at Thanksgiving Point yesterday.  I didn't get any pictures but that was because we were so busy exploring, playing and having a blast!  Seriously, we were there for an hour (it was only from 7-8) and we were only able to see two of the five exhibits, but even still, we didn't see everything in those two exhibits.  There was so much to do and the kids loved it!  That place alone will make an annual pass to Thanksgiving Point totally worth it.  We could go once or twice every month, we'd all love it and have fun, and it would pay for itself after just a few months.  They didn't pay me to say this!  It's totally my own opinion (and my husband agrees, so that's two people saying this).

Also, yesterday I worked on making my new computer desk pretty.  I wanted something that was simple and inexpensive, so I bought this desk from Ikea.  I like the look of it and $20 is a great deal.

I wanted to paint the legs gold and I saw this tutorial and I liked how the legs were kept attached to the table so they didn't roll around.

I opened up a large trash bag and cut it along one of the long sides and the bottom so that it opened up wider and put that down on the grass.  It was slightly damp and our lawn was aerated a couple weeks ago and I didn't want the dirt clumps to get the top all dirty.  Then I took two more bags and opened them up so they were flat, no cutting this time.  I unscrewed the legs, put the garbage bag over the hole and screwed the legs back onto the table on top of the bags.  Then I taped the two bags together in the middle so the wind wouldn't blow them over and I tucked the bags under the table all the around, pulling it tight so that I could get paint down to the base of the legs.

The spray paint I used was this one and I really love how it turned out.  I ended up needing two coats and the legs were totally covered and looked great.

Here's the finished product.

I also bought this chair.  My husband found it in the As-Is section at Ikea and we got it for $35 instead of $60.  It was used as a floor model and there was nothing wrong with it.  The As-Is section is the best and also very dangerous.

Well, hopefully the headboard will be totally finished in the next week or two.  I hear the tufting part is brutal, so we'll see how quickly I can get through it.  I have this picture in my head of how it's going to look and I just hope I can get it to come out the same way.  And I hope you all will like it too!  Happy weekend!!

Ikea Nightstand Hack

Tweet

I'm so excited to share my latest project!  Our brand new, mid century modern nightstands.  I love how they turned out and it's so satisfying to have them done and looking better than I imagined.

I shopped around for new nightstands for awhile.  I was having a really hard time finding ones that I liked, until I found these beauties at West Elm.

Unfortunately, we definitely could not afford $300 a piece.  Then I found this Ikea hack on Pinterest.  It was the solution to my problem and I immediately started planning out how I wanted our nightstands to look.

Here's what I used:
Expedit shelving unit
Expedit drawer insert
these gorgeous knobs from Anthropologie
6" round tapered legs
angle top mounting plate
Minwax stain in Early American
Minwax polyurethane in clear semi-gloss
painters' tape
sponge paint brush

Start by building the shelving unit and drawers, and inserting the drawers according to the instructions provided.  If you're going to use different drawer knobs than those provided, leave out the ones that came with the drawers.

Turn the unit upside down and measure out where you want your mounting plate to go; mark with a pencil inside the screw holes.  Carefully use a drill to make holes for the screws and attach the mounting plates.

To stain the legs, first tape off around the edge of the metal feet so that you don't get stain on them.  Apply as many coats as you like until you get the shade you want; I only did one coat.  After the stain is completely dry, apply a few coats of polyurethane to protect the wood from moisture and warping.  I stained and sealed the entirety of the exposed wood, including the top where it attaches to the mounting plate.

Once your legs are dry, attach them to your nightstand and put your knobs on.

Now you're done and ready to use your new nightstand!  What do you guys think?  I seriously am so in love with these!  And the best part is, they cost us $140 for both!  Here's the cost breakdown: the legs and hardware were $33 a with coupon code, the shelves were $35 (we found one in the as-is section for $15 and it only had one tiny ding in it that ended up on the bottom in the back, so you can't even see it), the drawer inserts were $40, and the knobs were $32 with shipping.  We already had the other supplies on hand.  Much better than $600 for two!  So, what do you guys think?